200-301 Exam Name - Cisco 200-301 Pass Test - Cisco Certified Network Associate Exam - Ginevragilardi

Our three versions of 200-301 Exam Name study materials are the PDF, Software and APP online. They have their own advantages differently and their prolific 200-301 Exam Name practice materials can cater for the different needs of our customers, and all these 200-301 Exam Name simulating practice includes the new information that you need to know to pass the test for we always update it in the first time. So you can choose them according to your personal preference. The results show that our 200-301 Exam Name study materials completely have no problem. Our company is rated as outstanding enterprise. We have free demos of the 200-301 Exam Name exam materials that you can try before payment.

Our 200-301 Exam Name study materials are designed carefully.

So please feel free to contact us if you have any trouble on our 200-301 - Cisco Certified Network Associate Exam Exam Name practice questions. Our 200-301 Valid Test Dumps.Zip study materials are available for downloading without any other disturbing requirements as long as you have paid successfully, which is increasingly important to an examinee as he or she has limited time for personal study. Therefore, our 200-301 Valid Test Dumps.Zip study materials are attributive to high-efficient learning.

Our 200-301 Exam Name exam quiz is so popular not only for the high quality, but also for the high efficiency services provided which owns to the efforts of all our staffs. First of all, if you are not sure about the 200-301 Exam Name exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy 200-301 Exam Name study guide or not.

Cisco 200-301 Exam Name - As you know, life is like the sea.

Victory won't come to me unless I go to it. It is time to start to clear exam and obtain an IT certification to improve your competitor from our Cisco 200-301 Exam Name training PDF if you don't want to be discarded by epoch. Many IT workers have a nice improve after they get a useful certification. If you are willing, our 200-301 Exam Name training PDF can give you a good beginning. No need to doubt and worry, thousands of candidates choose our exam training materials, you shouldn't miss this high pass-rate 200-301 Exam Name training PDF materials.

Our effort in building the content of our 200-301 Exam Name learning questions lead to the development of learning guide and strengthen their perfection. Our 200-301 Exam Name practice braindumps beckon exam candidates around the world with our attractive characters.

200-301 PDF DEMO:

QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html

QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html

QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.

QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html

QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/

We assist you to prepare the key knowledge points of EMC D-SNC-DY-00 actual test and obtain the up-to-dated exam answers. The high quality product like our WELL WELL-AP study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. We will offer you the privilege of 365 days free update for Salesforce OmniStudio-Consultant latest exam dumps. You will find the exam is a piece of cake with the help of our Symantec 250-586 study materials. You just need 20-30 hours for preparation and feel confident to face the Microsoft PL-200 actual test.

Updated: May 28, 2022